COMMON PROBLEMS IN COOLING SYSTEMS 

Fuga refrigerante
REFRIGERANT LEAKS
Contaminación externa
EXTERNAL POLLUTION
Corrosión
CORROSION 
Sobre-calentamiento
OVER-WARMING 

ALTERNATIVE SERVICES MESABI ®

STEEL WORK
STEEL WORK
  • Any damaged or worn structure is repaired as required.

  • Any structure with excess corrosion or non-repairable is replaced.

  • All radiator plugs are replaced.

  • All rubber baffles are inspected to ensure utility and are replaced if required.

  • All necks are inspected for damage or wear and are replaced if required; Likewise, the valves are inspected and replaced if required.

PANEL ASSEMBLY
PANEL ASSEMBLY
  • All tubes are removed from the heads and inspected.

  • The fin of the tubes is tested according to the original specifications.

  • The tubes are cleaned in a chemical cleaning agent, and then steam cleaned internally and externally.

  • A sample tube is cut and inspected for mineral deposits. internal contamination will be cleaned or the tube replaced if necessary.

  • All tubes are straightened, any damage to the fin will be repaired and both ends of the tube are polished to remove the remnants of the previous seals. Missing tube holders are replaced.

PLATES
PLATES
  • All head plates are cleaned, inspected and reworked as required.

  • The surfaces of the head plates are cleaned, inspected and reworked as required.

  • The holes are cleaned to eliminate contamination.

  • All seals are replaced with original MESABI® seals.

NEW PARTS
NEW PARTS
  • Any tube that does not meet the MESABI® specifications is replaced by original parts.

  • All hardware is replaced.

  • All packages are replaced.

  • All connections and hoses are replaced.

RE-ASSEMBLY
RE-ASSEMBLY
  • The honeycombs are assembled in MESABI® structures to ensure pressure and squareness all the time. Likewise, each tube is installed using the MESABI® quality standards.

  • The honeycombs are reassembled in the remanufactured structure with new gaskets and screw sets.

  • All units are tested to meet the pressure relief conditions of the valves, and at all times adhering to the worldwide known, strict MESABI® quality program.

  • After testing the radiator is dried and painted according to the original factory specifications.

  • Certified reconstructions are packed according to strict international safety standards to deliver to the customer.