AIR-TO-AIR AND AIR-TO-OIL COOLERS 

    Mesabi logo



    S FIN COOLERS 

    FOR HYDRAULIC AND COMPRESSOR OIL/AIR COOLING

    PRESSURES: up to 600psi (4137 kPa)

    S fin coolers are comprised of a single row of multi-ported high efficiency aluminum cooling tubes. The seal between the tube and header is held captive in header by a special process. Once a tube is in place, the seal is compressed to make a seal capable of withstanding the application specific pressures. MESABI® S fin charge air coolers and oil to air coolers can be designed to customer’s specifications.


    • FLEXIBLE CORE DESIGN
    • Individual cooling tubes held in headers with flexible rubber seals to absorb mechanical and thermal stresses that can cause conventional cores to leak

    • FIELD REPAIRABLE
    • Seals allow any damaged tubes to be removed and replaced in the field using simple hand tools and often without removing the cooler from equipment

    • EASY TO CLEAN
    • Clean with high-pressure air or water

    Mesabi logo


    CSC™ HIGH PRESSURE COOLERS 

    FOR HYDRAULIC AND COMPRESSOR OIL/AIR COOLING 

    PRESSURES: up to 500 psi (3447 kPa)

    Captured Seal Cooler™ coolers feature tube-to-header seals held captive in the header plate. Once a tube is in place, the seal is compressed to make a tube-to-header seal capable of withstanding tested pressures.


    • FLEXIBLE CORE DESIGN
    • Individual cooling tubes held in headers with flexible rubber seals to absorb mechanical and thermal stresses that can cause conventional cores to leak

    • FIELD REPAIRABLE
    • Seals allow any damaged tubes to be removed and replaced in the field using simple hand tools and often without removing the cooler from equipment

    • EASY TO CLEAN
    • Clean with high-pressure air or water

    Mesabi logo


    ALUMINUM TUBE COOLERS 

    FOR HYDRAULIC AND COMPRESSOR OIL/AIR COOLING 

    PRESSURES: up to 175 psi (1207 kPa)

    Standard aluminum tube coolers feature tubes with integral circular finning rolled from the tube wall. Turbulators are placed in tubes to increase heat transfer and are removable for cleaning.


    • FLEXIBLE CORE DESIGN
    • Individual cooling tubes held in headers with flexible rubber seals to absorb mechanical and thermal stresses that can cause conventional cores to leak

    • FIELD REPAIRABLE
    • Seals allow any damaged tubes to be removed and replaced in the field using simple hand tools and often without removing the cooler from equipment

    • EASY TO CLEAN
    • Clean with high-pressure air or water

    Mesabi logo


    COPPER TUBE COOLERS 

    FOR HYDRAULIC AND COMPRESSOR OIL/AIR COOLING 

    PRESSURES: up to 150 psi (1034 kPa)

    Copper tube coolers are similar in design to MESABI® engine radiators, but have internal turbulators. Designed for those applications where high efficiency is required and space available is limited.


    • FLEXIBLE CORE DESIGN
    • Individual cooling tubes held in headers with flexible rubber seals to absorb mechanical and thermal stresses that can cause conventional cores to leak

    • FIELD REPAIRABLE
    • Seals allow any damaged tubes to be removed and replaced in the field using simple hand tools and often without removing the cooler from equipment

    • EASY TO CLEAN
    • Clean with high-pressure air or water